Truck External, In-Line Single Revolving

$165.90

In-Line Cast aluminum construction with one 2” outside diameter aluminum pulley's on a 1/4” stainless steel axle.

Note: These trucks are designed to be used on flagpoles that have up to a 4.0” outside top diameter with female fitting installed.

The bottom of the spindle has a 1-1/4” NPT threading and is screwed into the top of the flagpole while the top spindle

is designed to accept an ornament with a spindle threading of 1/2” as standard.

The ornament is secured to the truck with a 1/4” stainless steel set screw.

For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies.

Maximum halyard (rope) diameter is 5/16” (recommended 5/16").

Write a Review