Product Description
A split collar can be useful when replacing or adding a collar to an installed flagpole without removing the pole from the foundation sleeve. The collar is split in half and mounting tabs with screws are installed on the under side of the collar. The quantity and size of the mounting tabs may vary depending on the size of the flash collar ordered.
The aluminum collar is .060" thick.
Satin Finish
Sizes range from 2" x 8" to 10" x 22"
Overall height of flash collar
If the total diameter of the collar is 8" wide then the height will be 2 1/4"
If the total diameter of the collar is 12" wide then the height will be 1 3/4"
If the total diameter of the collar is 16" wide then the height will be 2 7/8"
If the total diameter of the collar is 22" wide then the height will be 3 5/8"
