How to Install a Snaphook
(Click here to purchase Snaphooks)
Snap hook installation on rope:
Step 1: Determine where to install the snap hooks.
For a new flag: Measure the distance between the grommets on your flag. This will be the same distance between the snap hooks on the rope.
Replacing old snap hooks: First, make sure any knots or other rope flaws that would prevent the rope from threading through the pulley are at the bottom of the rope circle and the snap hooks are close to the top. Lower the flag and put the new snap in approximately the same location as the old snap hooks.
Step 2: Thread the snap hooks.
Slip a loop through the eye of the snap hook.
Put the loop over the top of the snap hook & draw rope tight.